Modeliranje procesa obrade rezanjem
Modeling of cutting processes
Doktorand
Mitrović, AnđelijaMentor
Kovač, PavelČlanovi komisije
Kovač, PavelGostimirović, Marin
Šešlija, Dragan
Nedić, Bogdan
Sekulić, Milenko
Metapodaci
Prikaz svih podataka o disertacijiSažetak
U radu je izvršeno modeliranje i simulacija procesa obrade glodanjem sa predviđanjem temperature u zoni rezanja pomoću metode konačnih elemenata. Kao ulazni parametri obrade za model uzeti su brzina rezanja, korak i dubina rezanja a kao izlazna performansa temperatura u zoni rezanja. Kreirani model za simulaciju obrade glodanjem proveren je eksperimentalnim testiranjem sa istim parametrima obrade. Izvršena je analiza eksperimentalnih rezultata sa predloženim modelom. Rezultati ovog istraživanja su pokazali da se modeliranjem i simulacijom procesa obrade glodanjem može adekvatno predvideti temperatura u zoni rezanja.
The work explains process of modeling and simulation of milling predictive temperature in the cutting zone by using the finite element method.The input parameters for the processing model are cutting speed, feed and depth of a cut. The temperature in the cutting zone was used as an output performance. Designed model that simulates milling is checked by experimental testing with the same machining parameters. The analysis of the experimental results with the proposed model was carried out. Results of this study show that the modeling and simulation of milling process can adequately predict the temperature in the cutting zone.