Sinteza i karakterizacija elektroprovodnih kompozitnihmaterijala na bazi biorazgradivih polimera i prahova metala
Synthesis and characterization of electroconducting composite materials based on biodegradable polymers and metal powders
Author
Pavlović, Miroslav M.
Mentor
Radojević, Vesna
Committee members
Uskoković, Petar
Janaćković, Đorđe

Ćosović, Vladan

Bojanić, Vaso
Metadata
Show full item recordAbstract
Kompozitni materijali dobijaju sve veću industrijsku primenu u svetu.
Kompoziti bazirani na polimerima sa provodnim puniocima su u novije vreme u širem
istraživačkom fokusu pre svega zbog njihovog rastućeg značaja sa gledišta primene.
Prirodni polimeri na bazi obnovljivih materijala sa dodatkom odabranih punioca mogu
se direktno koristiti kao savremeni materijali u: elektronici, medicini, industriji, kao
kontaktni provodni materijali, elektromagnetni i radiotalasni štitovi, fototermalni optički
snimači, elektronski nosevi osetljivi na određene hemikalije, ali i kao ekonomski
prihvatljiviji katalizatori. U tezi su prikazani eksperimentalni rezultati istraživanja
svojstava kompozitnih materijala na bazi lignocelulozne matrice (LC) punjenih
elektrolitičkim bakarnim prahom i hemijski dobijenim srebrnim prahom. Udeо metalnih
punilaca u kompozitnim materijalima u ispitnim uzorcima variran je u opsegu od 1.6-
30% (v/v), a uzorci su pripremljeni kompaktiranjem-presovanjem. U eksperimentalnom
d...elu za analizu i karakterizaciju polaznih konstituenata i istraživanih kompozita
korišćene su različite eksperimentalne metode i tehnike. Mikrostrukturna i morfološka
analiza vršena je primenom skening elektronske mikroskopije (SEM) i optičke
mikroskopije. Određena je veličina i distribucija čestica konstituenata, kao i gustina,
poroznost i električna provodnost kompozita u zavisnosti od udela punilaca.
Тeza se bavi sintezom i karakterizacijom elektroprovodnih kompozitnih
materijala pripremljenih hladnim presovanjem mešavina lignoceluloze i elektrohemijski
dobijenog bakarnog praha i hemijski dobijenog srebrnog praha pri različitim pritiscima,
kao i ispitivanjem uticaja veličine i morfologije čestica na provodnost i perkolacioni
prag dobijenih kompozita. Karakterizacija je uključivala različite tehnike ispitivanja:
SEM, TGA, DSC, X-ray, FTIR, raspodelu veličina čestica i merenja provodnosti
metodama DC U/I i impedansnom spektroskopijom.
Rezultati su pokazali da oblik i morfologija čestica punioca igra značajnu ulogu
na pojavu i ponašanje električne provodnosti pripremljenih uzoraka i pojavu...
Composite materials are gaining increasing industrial applications worldwide.
Composites based on polymers with conductive fillers have been recently in the wider
research focus primarily because of their growing importance from the point of
application. Natural polymers based on renewable materials with selected fillers can be
used directly as contemporary materials in: electronics, medicine, industry, as contact
conductive materials, electromagnetic and radio wave shields, photothermal optical
recorders, electronic noses sensitive to certain chemicals, as well as economically
acceptable catalysts. In this thesis the results of experimental studies of the properties of
composite materials based on lignocellulosic matrix (LC) filled with electrolytic copper
powder and chemically obtained silver powder are presented. Volume fractions of metal
fillers in the composite materials in tested samples were varied in the range of 1.6-30%
(v/v), and the samples were prepared by compression – col...d pressing. In the
experimental part of the analysis and characterization of the starting constituents and
studied composites different experimental methods and techniques were used.
Microstructural and morphological analysis were performed using scanning electron
microscopy (SEM) and optical microscopy. Particle size and distribution of the
constituents, as well as density, porosity and electrical conductivity of composites
depending on the volume fraction of the fillers were determined.
This thesis deals with the synthesis and characterization of conductive composite
materials prepared by cold pressing of mixtures of lignocellulose and electrodeposited
copper powder and chemically deposited silver powder obtained at different pressures,
as well as examination of the influence of particle size and morphology on the
conductivity and percolation threshold of the composites. Characterization included a
variety of testing techniques: SEM, TGA, DSC, X-ray, FTIR, particle size distribution
and conductivity measurement by DC U/I method and impedance spectroscopy...
Faculty:
Универзитет у Београду, Технолошко-металуршки факултетDate:
12-06-2015Projects:
- Advanced multicomponent metal systems and nanostructured materials with diverse functional properties (RS-172037)