Identifikacija karakteristika multiprocesnog rada klipnom motora SUS
Doktorand
Davinić, Aleksandar Lj.Mentor
Pešić, RadivojeČlanovi komisije
Radonjić, DragoljubPetković, Snežana
Pešić, Radivoje
Metapodaci
Prikaz svih podataka o disertacijiSažetak
Reciprocating internal combustion engines are dominantly applied in road transport means.Their mass use rapidly depletes the energy resources and creates ecological problems. Strict regulations regarding emissions of carbon-dioxide, toxic gases, particulates and noise are effective today. Modern technology has not jet given the suitable alternative in terms of performance and overall energy efficiency, so the internal combustion engines will be the basis for vehicle drives for many years to come.
Internal combustion engine’s economy and emissions largely depend on the
characteristics of the work process, thus development in this area has a great potential. In addition to original Otto and Diesel concepts, work processes combining their good qualities are also in use. Increase of efficiency and reduction of raw emissions are achieved by application of multiprocessing working principle, where the working zone of the engine is divided into zones with different operating modes.
The subject... of this dissertation is to identify the influence of the working parameters and
the type of fuel (classical or bio-fuels) on characteristics of individual work processes of
multiprocessing Otto/Diesel engine. The research was conducted on original experimental engine
with application of standard European stationary test. The influence of compression ratio, type of
fuel and control parameters on efficiency and exhaust emissions is observed. The summarized
results of the test and the results obtained in individual test regimes are shown. Also, an example
of defining the Otto or Diesel working areas is given according to the criteria of efficiency and
particulate emissions.
Fakultet:
Универзитет у Крагујевцу, Факултет за машинство и грађевинарство, КраљевоDatum odbrane:
2013Projekti:
- Istraživanje bezbednosti vozila kao dela kibernetskog sistema: Vozač-Vozilo-Okruženje (RS-MESTD-Technological Development (TD or TR)-35041)