Istraživanje ponašanja adhezionih spojeva metalnih konstrukcija pod dejstvom statičkog i cikličnog opterećenja
Doktorand
Stojković, Nenad V.Mentor
Topličić Ćurčić, GordanaČlanovi komisije
Folić, RadomirPasternak, Hartmut
Stojić, Dragoslav
Živković, Srđan
Metapodaci
Prikaz svih podataka o disertacijiSažetak
Adhesive joints offer many advantages compared to the traditional
joining techniques in metallic structures. However, the lack of unified
design standards and procedures limit their wider use in civil engineering
industry. For the purpose of standardization, extensive experimental
work has to be done on investigating their behavior under the service
conditions. Besides the influence of the joint geometry, the
manufacturing process and the temperature and humidity effects, type of
the loading has the greatest influence on the behavior of adhesive joints.
Main goal of this dissertation was to investigate behavior of adhesive
joints in metallic structures under static and cyclic loading, using modern
experimental and numerical methods. In order to achieve this the
selection of proper adherent surface preparation procedure was
necessary.
Experimental investigation of the behavior of adhesive joints subjected
to static and cyclic loading was conducted on two types of adhesive
...
joints: galvanized steel façade joint and double lap shear joint. Based on
the results of the experimental investigation, as well as the results from
the literature, new models and methods were developed for modeling of
the behavior and predicting the fatigue life of adhesive joints subjected to
static and cyclic loading.