Show simple item record

Determination of averaged axisymmetric flow in hydraulic turbomachinery runner

dc.contributor.advisorMilenković, Dragica
dc.contributor.otherBabić, Milun
dc.contributor.otherNikodijević, Dragica
dc.creatorBogdanović-Jovanović, Jasmina B.
dc.date.accessioned2016-01-05T13:22:08Z
dc.date.available2016-01-05T13:22:08Z
dc.date.available2020-07-03T16:04:10Z
dc.date.issued2014-12-24
dc.identifier.urihttp://eteze.ni.ac.rs/application/showtheses?thesesId=2158
dc.identifier.urihttp://nardus.mpn.gov.rs/handle/123456789/3900
dc.identifier.urihttps://fedorani.ni.ac.rs/fedora/get/o:992/bdef:Content/download
dc.identifier.urihttp://vbs.rs/scripts/cobiss?command=DISPLAY&base=70052&RID=533685142
dc.description.abstractThe first chapter of the paper is introductory unfolding, where the task of hydrodynamic calculation is presented, as well as the schema of flow in the flow-through part of turbomachine. It also outlines an overview of recent results in this field, limited to the most significant results, as well as those who have paved the way to some new methods of study and recalculation of the hydraulic turbomachinery and low pressure fans. The main task of the turbomachinery hydrodynamic calculation (the design of flow components that provide the required operated parameters, and at the same time achieving its maximum energy efficiency), is a very complex task which requires a unified application of theoretical and experimental research results. In order to achieve practically applicable methodology for the turbomschinery calculation, the simplification of the fluid flow and fluid characteristics is performed: physical flow is simplified as two-dimensional, in some cases even one-dimensional flow, the turbomachinery operates in a steady operating regime, when the flow can be considered invariant with time, and the fluid in hydraulic turbomachinery and low pressure fans can be regarded as incompressible. The basic assumption is that the flow in turbomachinery runners and its stationary parts are axisymmetric, although realistically it is not the case. Also, in the introductory chapter, the basics of determining the shape of the hydraulic turbomachinery blades are represented. At the end of this chapter, the application, development and significance of the numerical simulation of fluid flow regarding turbomachinery design and testing, with emphasis on the most significant achievements in this field and its application to the turbomachinery performance, is showed. In the second chapter of the doctoral thesis a brief overview of the methodology of numerical simulation of flow, turbulence modeling and application a possibility of CFD (Computational Fluid Dynamics) methods to flow in turbomachinery is given. Especially the numerical simulation of flow in hydraulic turbomachinery and low pressure fans runners, but also in the fixed vane and vaneless stationary parts of turbomachinery, is considered. Due to the simple application, but also the required computing resources for the purpose of ix numerical flow simulation, the focus was on solving the Reynolds-averaged equations (i.e. RANS equations). The basic equations of fluid flow (partial differential equation) are given, which are, in the process of the temporal and spatial discretization, transformed into a system of algebraic equations, suitable for numerical implementation. The system of equations is closed by using any of the existing models of turbulent flow (i.e. turbulence models), what was also discussed in this chapter. In the last part of this chapter the principles of numerical solving of fluid flow are given (beginning with discretization, difference schemes, the generation of the computational grid, and ending with the convergence criterion of the obtained solution). Examples of numerical simulations obtained by using commercial software Ansys Flow Dynamics, which consists of turbomachinery module and validation of numerical models, are the subjects of the third chapter. The examples of numerical simulations of different turbomachines are presented, in following order: I) low pressure reversible axial flow fan with plane runner blades, II) axial-flow propeler pump and III) centrifugal pump. For all cases, the physical model is first presented, and then a numerical model is created, while the results of numerical simulations are given as the display of operating parameters obtained for a defined number of revolutions. The operated parameters of each presented turbo machine obtained by numerical simulations of the flow in the range of operating flow rate, compared with the operating characteristics obtained by experimental tests of appropriate machines under laboratory conditions, therefore performing the validation of the model. When it comes to turbomachinery, with respect to their practical application, it can be considered that the model validation is performed if the relative error of operating parameters in all current regimes does not exceed 5%. The flow parameters in different discrete points of the turbomachinery runner, i.e. in different cross-sections of the runner (position, pressure, and velocity) of all presented examples, which are used for the purpose of averaging, were presented in the form of tables given in the Appendix of this dissertation. The fourth chapter deals with the determination of averaged axisymmetric flow surface according to the results obtained by numerical simulation of flow in hydraulic turbines and low pressure fans. The real flow in the profile cascades of hydraulic turbomachinery and fans is not axially symmetric, and the can be reduced to axisymmetric flow fictively, if the flow parameters in the blade channels are averaged according to a circular coordinate. Values of x flow parameters at discrete points of the considered flow field are obtained by numerical simulations. According to the results of numerical simulations of flow in turbomachinery runner, it is possible to determine the averaged flow parameters accordint to the circular coordinate, and then to determinate the averaged axisymmetric flow surfaces. The methodology of averaging flow parameters according to the circular coordinate and obtained equations are presented in this chapter. The results of determining the meridional flow streamlines of the averaged fluid flow using the integral equations of continuity, for the cases presented in the chapter 3, are presented in the fifth chapter. Guided by the theory and the equations given in section 4, the results of determination of averaged streamlines in hydraulic turbomachinery and low pressure fans runner, respectively averaged axisymmetric flow surface. In addition, the specific works of elementary stages on averaged axisymmetric flow surfaces in the turbomachinery runner are determined, as well as torque and power of the runner. Finally, the calculation of flow rates of the averaged mechanical flow energy through axisymmetric flow control surfaces, at the entrance and exit of the work area of the runner, is performed, leading to the significant information on the fluid energy losses in the turbomachinery runner. At the end of the dissertation the Conclusion is presented, and in the Appendix tables the averaged values of flow parameters in the corresponding sections of the turbomachinery runners are presented. The results of averaging according to the circular coordinate, as defined in section 4, are presented, and these results are used in section 5.en
dc.formatapplication/pdf
dc.languagesr
dc.publisherУниверзитет у Нишу, Машински факултетsr
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/33040/RS//
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/35016/RS//
dc.rightsopenAccessen
dc.sourceУниверзитет у Нишуsr
dc.subjectOsrednjeno osnosimetrično strujanjesr
dc.subjectAveraged axisymmetric flowen
dc.subjecthidraulične turbomašinesr
dc.subjectniskopritisni ventilatorisr
dc.subjectmeridijanske strujnicesr
dc.subjecthydraulic turbomashineen
dc.subjectlow pressure fanen
dc.subjectmeridionalen
dc.subjectstreamlinesen
dc.titleOdređivanje osrednjenog osnosimetričnog strujanja u radnim kolima hidrauličkih turbomašinasr
dc.titleDetermination of averaged axisymmetric flow in hydraulic turbomachinery runneren
dc.typedoctoralThesis
dc.rights.licenseBY-NC
dcterms.abstractМиленковић, Драгица; Никодијевић, Драгица; Бабић, Милун; Богдановић-Јовановић, Јасмина Б.; Одређивање осредњеног осносиметричног струјања у радним колима хидрауличких турбомашина; Одређивање осредњеног осносиметричног струјања у радним колима хидрауличких турбомашина;
dc.identifier.fulltexthttp://nardus.mpn.gov.rs/bitstream/id/52554/Bogdanovic_Jovanovic_Jasmina_B.pdf
dc.identifier.fulltexthttp://nardus.mpn.gov.rs/bitstream/id/52553/Disertacija.pdf


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record